Zr-Fe-Cr合金在500 ℃过热蒸汽中耐腐蚀性能研究
Study on Corrosion Resistance of Zr-Fe-Cr Alloy in 500 ℃ Superheated Steam
张太平1, 王 均1,2, 熊 计1, 应诗浩2
点击：4198次 下载：0次
作者单位：(1. 四川大学 制造科学与工程学院, 四川 成都 610065; 2. 中国核动力研究设计院 核燃料及材料国家级重点实验室, 四川 成都 610041)
中文关键字：Zr-Fe-Cr合金； 耐腐蚀性能； 过热蒸汽； 合金元素
英文关键字：Zr-Fe-Cr alloy; corrosion resistance; superheated steam; alloying elements
中文摘要：研究了不同含量的Zr-Fe-Cr合金的显微组织及其在500 ℃、10.3 MPa过热蒸汽中的耐腐蚀性能。结果表明，不同合金元素含量的Zr-Fe-Cr样品，经500 ℃、10.3 MPa过热蒸汽腐蚀后，抗腐蚀性能差别很大。合金元素含量较少的合金(Zr0.2Fe0.1Cr)热处理后析出第二相很少，耐腐蚀性能很差；而适当含量Fe、Cr的Zr-Fe-Cr合金抗腐蚀性能较好。同时，氧化膜中存在的孔隙和裂纹也影响锆合金的耐腐蚀性能。
英文摘要：The corrosion resistance and microstructure of Zr-Fe-Cr alloys with different content of Fe and Cr was investigated in the superheated steam of 500 ℃, 10.3 MPa. The results show that the specimens with different content of Fe and Cr have quite different corrosion resistance by corrosion tests. The specimens with less alloying elements (Zr0.2Fe0.1Cr) precipitate very little SPP and show a poor corrosion resistance; and the Zr-Fe-Cr alloys with appropriate content of Fe and Cr have a excellent corrosion resistance. At the same time, the pores and cracks present in the oxide film and affect the corrosion resistance of zirconium alloys.