热处理制度对TC4大棒材组织和性能的影响
Effect of Heat Treatment on Microstructure and Mechanical Property of TC4 Alloy Big Bar
唐晓东, 史小云, 杜予晅
点击：5275次 下载：0次
作者单位：西部超导材料科技有限公司, 陕西 西安 710018
中文关键字：TC4钛合金； 棒材； 显微组织； 拉伸性能； 断裂韧性
英文关键字：TC4 titanium alloy; bar; microstructure; tensile properties; fracture toughness properties
中文摘要：研究了热处理制度对?准350 mm的TC4大棒材组织和性能的影响。结果表明：TC4大棒材热处理后的显微组织为等轴α + β转；等轴α相呈椭球状和短棒状，β转呈条状，且等轴α相与β转交错分布。随着退火温度的升高，等轴α相和β转尺寸减小，均匀化程度增强。同时，室温强度和断裂韧性逐渐升高。
英文摘要：The effects of heat treatment on microstructure and mechanical properties of TC4 alloy big bar (?准350 mm) is researched. The results show that a uniformed bimodal microstructure of equiaxed alpha phase and beta phase is found. Equiaxed alpha phase is shape of ellipsoid or short rod. Beta phase is lath. The size of alpha phase and beta phase reduces, and the uniform of alpha phase and beta phase enhances with the increase of annealing temperature, while tensile strength and fracture toughness at room temperature increase with the increase of annealing temperature.