网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->预发布刊期->录用待安排稿件


圆角喷丸铝合金材料疲劳特性的试验研究
魏晓明
点击:2382次 下载:0次
作者单位:西北工业大学力学与土木建筑学院
中文关键字:圆角;喷丸;疲劳寿命
英文关键字:fillet; shot peening; fatigue life
中文摘要:针对不同直径圆角铝合金在喷丸和未喷丸下的疲劳对比试验,试验分析结果表明:圆角喷丸强化试验件的疲劳寿命高于未喷丸的试验件,但分散性增大;圆角半径越大,喷丸件寿命分散性越大。
英文摘要:Fatigue tests were carried out on “shot peened” and “as-prepared” specimens with different fillets to compare their fatigue lives. The experimental and analytical results shows that fatigue lives of shot peened specimens were improved remarkably comparing with that of “as prepared” specimens. However, the dispersity of the fatigue lives associated with the shot peened fillets was increased comparing with that associated with the “as-prepared” specimen. Meanwhile, the dipersity increases with the increase of fillet radius
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发