液态模锻成形薄板件产生缺陷的原因及对策
Defective Reason and Solve Method of Forming Sheet by Liquid Die Forging
罗贻正，王家宣，方敏，李文杰
点击：2877次 下载：0次
作者单位：（南昌航空大学 航空制造工程学院，江西 南昌 330063）
中文关键字： 液态模锻； 薄板件；成形缺陷
英文关键字： liquid die forging; thin-sheet; forming defect
中文摘要：采用液态模锻成形方法对成形薄板件进行了初步探讨。结果表明，液态模锻成形工艺的选择和模具结构对试验件质量至关重要，当模具预热温度在250℃～300 ℃，浇注温度控制在740 ℃左右；模具浇口采用扇形结构，对合金液充型时的流量合理控制，可以避免制件缺陷的产生。
英文摘要：The forming thin-sheet parts by liquid die forging process were studied. The results show that choosing the liquid die forging process and the dimension of die has an important influence on the quality of forming parts. When the preheating temperature of die is 250~300 ℃, the pouring temperature is 740℃, and the flow velocity of molten alloy is reasonably controlled by the die with fan-shaped gating, the defects of forming sheet parts can be avoided.