网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


合金成分对Cu-Zn-Al形状记忆合金相变性能的影响
Effect of Alloy Composition on Phase Transition Properties of Cu-Zn-Al Shape Memory Alloy
柳月静, 陈忠家, 刘晓燕, 黄丹彤
点击:3731次 下载:0次
作者单位:(合肥工业大学 材料科学与工程学院, 安徽 合肥 230009)
中文关键字:形状记忆效应; Cu-Zn-Al; Zr; 回复率; 相变温度
英文关键字:shape memory effects; Cu-Zn-Al; Zr; recovery rate; phase transition temperature
中文摘要:分别对不含Zr、含0.1Zr和0.2Zr(wt%)的三种合金进行显微组织观察,回复率测试,相变温度测试以及X射线衍射分析等。结果表明,Zr能起到细化晶粒的作用;Zr的加入可以降低合金的相变温度;同时,在一定范围内,Zr的加入能增大合金的记忆回复率,但当超过某一值时,回复率反而减小;三种合金在850 ℃固溶后,仍会残留少部分母相。
英文摘要:The influences of Zr on the microstructure and properties of Cu-Zn-Al alloy with three different composition(no Zr, 0.1Zr and 0.2Zr (wt%))  were  studied. The  experiments  of microstructure, recovery rate, phase transition temperature and X-ray diffraction analysis were carried out. The results show that Zr can refine the grain and reduce the phase transition temperature. In a certain range, Zr can increase the recovery rate; but when it reaches a certain content, the recovery rate decreases again. Under the solution treatment of  850 ℃, there are a few remained parent phases.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发